View S2A_933509.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

S2A-S2M
Discrete POWER & Signal Technologies
S2A - S2M
0.185 (4.699) 0.160 (4.064)
Features * * * *
Easy pick and place. Low forward Voltage Drop. High Current Capability. High Surge Current Capability.
0.083 (2.108) 0.075 (1.905)
2
1
0.155 (3.937) 0.130 (3.302)
0.220 (5.588) 0.200 (5.080)
SMB/DO-214AA
COLOR BAND DENOTES CATHODE
0.096 (2.438) 0.083 (2.108)
1.5 Ampere Glass Passivated Rectifiers
Absolute Maximum Ratings*
Symbol
IO if(surge) PD RJC Tstg TJ
TA = 25C unless otherwise noted
0.050 (1.270) 0.030 (0.762)
0.008 (0.203) 0.004 (0.102)
0.012 (0.305) 0.006 (0.152)
Parameter
Average Rectified Current @ TA = 100C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Case ** Storage Temperature Range Operating Junction Temperature
Value
1.5
Units
A
50 2.35 18.8 16 -65 to +150 -65 to +150
A W mW/C C/W C C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on FR-4 PCB 0.013 mm.
Electrical Characteristics
Parameter
2A Peak Repetitive Reverse Voltage Maximum RMS Voltage DC Reverse Voltage (Rated VR) Maximum Reverse Current TA = 25C @ rated VR TA = 125C Maximum Forward Voltage @ 1.5 A Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz 50 35 50
TA = 25C unless otherwise noted
Device
2B 100 70 100 2D 200 140 200 2G 400 280 400 1.0 125 1.15 2.0 30 2J 600 420 600 2K 800 560 800 2M 1000 700 1000
Units
V V V A A V S pF
(c)1999 Fairchild Semiconductor Corporation
S2A-S2M, Rev. A
S2A-S2M
Surface Mount Rectifiers
(continued)
Typical Characteristics
Non-Repetitive Surge Current
PEAK FORWARD SURGE CURRENT (A) 50
Forward Current Derating Curve
2 FORWARD CURRENT (A)
1.5
40
30
1
0.5
RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED 8.0 x 8.0 mm COPPER PAD AREAS
20
10
0
0
25
50 75 100 125 150 AMBIENT TEMPERATURE ( C)
175
0
1
2
5 10 20 50 NUMBER OF CYCLES AT 60Hz
100
Forward Characteristics
10
REVERSE CURRENT ( A) 10
Reverse Characteristics
T A = 125 C
FORWARD CURRENT (A)
1
1
T A = 100 C
0.1
TA = 25 C Pulse Width = 300s 2% Duty Cycle
0.1
TA = 25 C
0.01 0.4
0.01
0.6
0.8 1 1.2 1.4 FORWARD VOLTAGE (V)
1.6
0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Junction Capacitance
100 50 CAPACITANCE (pF)
20 10 5
2 1 0.1 0.2
0.5 1 2 5 10 20 REVERSE VOLTAGE (V)
50 100
S2A-S2M, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM
DISCLAIMER
ISOPLANARTM MICROWIRETM POPTM PowerTrenchTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 TinyLogicTM
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.

▲Up To Search▲

Price & Availability of S2A

	To Download S2A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .